Triumph 675 Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 · (Edited by Moderator)
Hello all,
Great forum and thanks for letting me join. Much appreciated.
I’m a long time rider of just about anything with two wheels. A couple of years ago I decided to build a reverse trike. I needed a a really compact bike engine and I always liked the 675 Daytona. So here we are…
I acquired this motor for next to nothing. I would really like to rebuild it, but I have no idea the year it was made so I can get parts. The engine number is 6309003.
Also, it there a good non-dealer parts source that someone here has dealt with?
Many thanks!
Motor vehicle Automotive design Automotive exterior Gas Automotive tire
Tire Wheel Vehicle Automotive tire Locking hubs
Tire Wheel Automotive tire Vehicle Automotive design
Motor vehicle Gas Auto part Machine Nut
 

· Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Thanks for the advice.
I also need to source an ecu and wiring. I have noticed that 1st gen wiring and ecus are very expensive and tough to come by. Does anyone know if the ecu or harness from an 06-08 street triple R will work? I plan to ditch the exup valve anyway. Thanks in advance...
 

· Registered
Joined
·
931 Posts
I don't believe there was a ST3R in 06-08. I do remember reading however, that a 2nd gen harness and ecu work with the first gen engine. One or two pins/wires need to be changed though. You will have to research this one.
 
1 - 4 of 4 Posts
Top