Triumph 675 Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
164 Posts
Discussion Starter · #1 ·
first time ive had this happen.. was careful as usual giving the 675 a wash but no start even after a days dryout..

turning igntion, fuel pump taking longer than usual but gauges fine. ignition cuts almost immediately , temp light comes on and temp gauge goes up to full blinks and comes back down…

checked a few fuses and dried things out like battery and fuses, nada… what are some good things to try?
 

· Registered
Joined
·
445 Posts
1. Check the multi-connector between the ignition switch barrel and the main harness. 2. the connection to the dash.

After that, it's all the connectors under the tank. Good luck, crap like this is usually difficult to diagnose.
 
  • Like
Reactions: SpaceCaptain
1 - 2 of 2 Posts
Top