Triumph 675 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
653 Posts
Discussion Starter · #1 ·
Ok, BikeBandit says the front size is 20X42X12 with a seal size of 38x42x6

and the rear sizes as 20x47x14 with a seal of 28x47x7 for the wheel and the cush bearing at 25x52x15 with a seal of 35x52x6

My concern is I've seen others post that they all the rears were 52 OD.

Anyone know the actual specs?

Thanks
Tom
 

·
Registered
Joined
·
1,391 Posts
Where are you getting your bearings? They usually have a serial number on them. If you take them to a bearing shop and tell them the bike they can match it up lickity split
 

·
Registered
Joined
·
653 Posts
Discussion Starter · #3 ·
Probably going to either a NAPA or local family owned shop that supplies timken bearings. I guess I'll need to pull my wheels tomorrow.

Unless some one has the part numbers for front and rear
 
1 - 5 of 5 Posts
Top