Woodcraft just released one of their plug and play harnesses for the 675. Instead of a separate switch it configures everything for the RHS on/off switch.
Keyless track mod
41 - 60 of 73 Posts
Not for a 2011
This didn't make sense to me, so I emailed Woodcraft. Eric got back to me confirming that it should work on the 09-12 models as well.Not for a 2011
I've ordered one, so if you want, hold off on purchasing and I'll post back here once I install and confirm that it works ok.
JD, thanks for PMing the instructions, but if the Woodcraft unit works, I'll go with that, it's worth the price to me to leave the wiring unbastardized.
Thanks for sending that. Seems very easy, and with no resister, so the whole chip thing in the key seems suspect at this point. >
This is America, and Triumph does not chip the keys in our 06-12 Daytona's... Had a 2010 here at the house on Monday with no chip in the key which worked just fine. Even better after doing some free mods and a little remapping.Thanks for sending that. Seems very easy, and with no resister, so the whole chip thing in the key seems suspect at this point. >
Keyless ignition was an awesome mod
That is interesting because the gentleman on the phone from woodcraft said the US models were the same as the UK and there was a chip...can't believe everything you hear I guess >This is America, and Triumph does not chip the keys in our 06-12 Daytona's... Had a 2010 here at the house on Monday with no chip in the key which worked just fine. Even better after doing some free mods and a little remapping.
Now I just need the time to trim the wires :surprise:
The difference between the 06-08 and the 09-12 is the plug on the ignition switch.
Here is a pic of the Woodcraft plug on the top and a 2011 675R ignition plug below. I've asked them to see if they can source this plug.
![]()
Here is a pic of the Woodcraft plug on the top and a 2011 675R ignition plug below. I've asked them to see if they can source this plug.
Attachments
41 - 60 of 73 Posts
