[Tq400020v]

I have an 2007 triumph daytona 675 is it possible to put a 2017 675r engin it? Mine is blown got the bike cheep with alot of nice parts and can get a 17 engine cheep. Would it be easier to use the 07 wiring and tune the ecu or reto fit the newer wiring? Will it bolt in? Any help would be appreciated

 

[Far Canal]

I've seen a few threads about it. From memory you'll need to swap the engine, exhaust, airbox, tank, ECU, dash, wiring harness and switch blocks.

 

[Tq400020v]

I've seen a few threads about it. From memory you'll need to swap the engine, exhaust, airbox, tank, ECU, dash, wiring harness and switch blocks.

I couldn't find a good thread on it or one with a swap that far appart in years. But thank you

 

[Far Canal]

There is plenty of info in previous threads, but no-one is going to spoon feed it to you. You'll need to keep looking and reading until you understand exactly what is needed to do the job. I certainly wouldn't just be taking the word of complete strangers.

 

[Tq400020v]

Figured it out. Retrofitted the old electronic.

 

[Far Canal]

Figured it out. Retrofitted the old electronic.

Anyone can make it fit. Does it start and run?

 

[Tq400020v]

Yes it runs

 

[Far Canal]

Exactly what type of electrical problems are you having then? Swap issue, help please!