Triumph 675 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Repair/Troubleshooting
    I took my clutch apart a few times to try to fix the slipping without buying new plates. I sanded the steel plates and replaced the springs. I measured all plates and they are all within manufacturer spec but the clutch slips anyway. So I open the clutch again and I see that this time one...
  2. Performance Mods
    I'm having slippage issues under track conditions in third gear. My best guess after asking around to the problem is a bad clutch. I've purchased the Barnett clutch pack and the necessary gaskets, etc. My question is when I replace the stock components, do i need to reinstall the judder...
1-2 of 2 Results