Hi I am in search of passenger foot pegs plus the mounts so my girlfriend can ride with me I can’t find any on eBay or online any help would be awesome. I was also wondering what passenger foot pegs from a different model bike or if any year 675r pegs would fit on my 06’ 675
FS: 2012 Triumph 675R - $7,200 - NYC - 5.4k miles
Up for sale is a 2012 Triumph 675R with 5400 miles. It is an amazingly nimble bike at only 408lb, lighter than most, if not all, other bikes in the 600cc category. The bike was built for the track as you'll note the front and rear...
Hi all, currently looking at my first Triumph Daytona 675 2009. Looking for some general information on them; known issues, potential mods etc. Not too experienced with this brand so was hoping to get some insight! Thank you.
From a 2007 daytona 675.
Woodcraft rearsets. I believe they are complete. Might need a bolt or two but those are inexpensive.
Instructions and stickers(may not still stick)
Slight rash on brake lever tip. Also had bolt strip so i had to grind bolt off. so there is slight cut on one side of...
Hi!, i am new here, and i want to change the rearset of my daytona 675 2009, i want to go with a Woodcraft rearset, and i want to put the sensor of brake light with out zipers, but i dont know if is M10x1.00 or M10X1.25
Can you help...
This tasteful and feisty machine has been a huge delight to me, both for riding and performing routine maintenance over the years. It was my dream bike. I am now selling as I prepare to settle down and start a family. Bike comes with a brand new pair of Pilot Power 3 tires (less than 15 miles...
After holding onto this for far too long, I have to let her go. She just sits in my living room taunting me. But have had too many broken bones and injuries and hurts to ride her anymore.
2008 Daytona 675 SE
Only 5300 miles
1. Jardine Exhaust
2. Triumph TOR tune
3. Smoke rear tail light
[Edited 12/7 to sell all remaining small parts]
Time to make some space. I took all these off my '12 bike in early '13 when the bike had 800 miles on it. Everything is super clean, near perfect condition. Prefer to sell and ship as a single lot or a few groups so discounts for groups...
My friend is converting his bike to track mode, and no longer needs these fairings. Unfortunately the have a couple scratches and cracks in places, but nothing you'll notice more than a few feet away.
The crack on the nose fairing I showed spread apart and pushed together. I will be...
Does anyone out there know what year of ECU I can put into my 2006 675. Recently my ECU you got fried and I am looking to replace it. What year of Daytona ECU you will fit in run correctly in my motorcycle. To me it looks like the 2006 through 2010 had the same ports and pins as my ECU but I...
Just purchased a 2009 Street Triple r, with a number of add ons. This bike had unbelievably low miles (under 400), and was better than new. I've put about 70 miles on so far, just getting to know the bike a little. I'm an old dirt biker, a little motocross and flat track. I love the smooth...
Located in Central New Jersey.
The bike is in pristine condition and rides like a dream.
As with most bike sales, wifey and I recently had a baby so it's time to hang up the mitts (for now..)
I've not ridden her as much lately (as evident by the low miles) so she needs a new home.
[Take Two: I failed reading comprehension and didn't follow the Classified ad rules the first time I posted this ad (sorry Mods). I'll read slowly from now on. :smile:]
Bike: 2014 Triumph Daytona 675R
Miles: 127 miles (not a typo)
I am searching for passenger foot pegs and the brackets for my 2007 triumph daytona 675. I have searched all over and they seem to be hard to find. I was wondering if other bike model brackets would fit on my daytona. Or if the newer year daytona models would fit my 2007. Any information...
Hi. I have a 2010 daytona 675. used as a track bike only. but I have just replaced the rear brake disc and on replacing the rear wheel, tightening the nut with my torque wrench to 110 nm,(as in the manual) the wheel is very tight, doesn't spin free, in fact its very tight. I have the spacers in...