2011 D675 Down Shift Issue - Page 3 - Triumph675.Net Forums
Maintenance and repair Problems, fixes, general maintenance talk

Reply
 
Thread Tools Display Modes
post #21 of 33 Old 04-19-19, 22:03
cdenley
Member
 
Join Date: Jul 2016
Location: Elgin, IL
Posts: 224
Thanks: 29
Thanked 9 Times in 9 Posts
Garage
Quote:
Originally Posted by MadMel View Post
My bike is dyno tuned, making 125 hp & 54 ft-lbs on that particular dyno. No issues with the stock springs for me.
Glad to hear that. Mine only made 120 hp & 53 ft-lbs with the Arrow system and pump fuel. Need to get it tuned for the Akra system now. I've been using the STM slipper with diaphragm springs.

Chris Denley
CCS Midwest Amateur #212
fb.me/DenleyRacing
cdenley is offline  
Sponsored Links
Advertisement
 
post #22 of 33 Old 04-19-19, 22:17
MadMel
Senior Member
 
MadMel's Avatar
 
Join Date: Feb 2012
Location: Brisbane
Posts: 1,852
Thanks: 88
Thanked 58 Times in 47 Posts
Quote:
Originally Posted by cdenley View Post
Quote:
Originally Posted by MadMel View Post
My bike is dyno tuned, making 125 hp & 54 ft-lbs on that particular dyno. No issues with the stock springs for me.
Glad to hear that. Mine only made 120 hp & 53 ft-lbs with the Arrow system and pump fuel. Need to get it tuned for the Akra system now. I've been using the STM slipper with diaphragm springs.
The only power mods on my bike are an Akra full system and a MWR race air filter. Of course, outright HP numbers need to be taken with a grain of salt, every dyno is different. Relative numbers though... hope you see a good bump with your new tune.
MadMel is offline  
post #23 of 33 Old 04-20-19, 08:00 Thread Starter
apiazza
Junior Member
Threadstarter Threadstarter
 
apiazza's Avatar
 
Join Date: Jul 2018
Posts: 67
Thanks: 5
Thanked 2 Times in 2 Posts
Quote:
Originally Posted by MadMel View Post
@apiazza Turns out that I not only saved the manual to Google Drive, but I also PDFed a how-to thread from this forum so I could print it out for when I did the job.

https://drive.google.com/file/d/0Bz9...w?usp=drivesdk

https://drive.google.com/file/d/0Bz9...w?usp=drivesdk
Awesome. Thank you. I just sent a request for the docs.


I did see the mention of stiffer springs from what yoyo sent me last night. I'll stick with stock. Parts and tools are ordered. Might have some time next weekend to tackle. First thing is to pull a couple parts out of spare blown up engine.

Sent from my SM-G965U using Tapatalk
apiazza is offline  
 
post #24 of 33 Old 04-20-19, 16:26
MadMel
Senior Member
 
MadMel's Avatar
 
Join Date: Feb 2012
Location: Brisbane
Posts: 1,852
Thanks: 88
Thanked 58 Times in 47 Posts
Quote:
Originally Posted by apiazza View Post
Quote:
Originally Posted by MadMel View Post
@apiazza Turns out that I not only saved the manual to Google Drive, but I also PDFed a how-to thread from this forum so I could print it out for when I did the job.

https://drive.google.com/file/d/0Bz9...w?usp=drivesdk

https://drive.google.com/file/d/0Bz9...w?usp=drivesdk
Awesome. Thank you. I just sent a request for the docs.


I did see the mention of stiffer springs from what yoyo sent me last night. I'll stick with stock. Parts and tools are ordered. Might have some time next weekend to tackle. First thing is to pull a couple parts out of spare blown up engine.

Sent from my SM-G965U using Tapatalk
Oops, I forgot to allow sharing with a link. Fixed now, anyone should be able to download.
MadMel is offline  
post #25 of 33 Old 04-20-19, 16:33
MadMel
Senior Member
 
MadMel's Avatar
 
Join Date: Feb 2012
Location: Brisbane
Posts: 1,852
Thanks: 88
Thanked 58 Times in 47 Posts
Found the original post that I PDFed, it's really good.

https://www.triumph675.net/forum/sho...1#/topics/5191
MadMel is offline  
The Following User Says Thank You to MadMel For This Useful Post:
apiazza (04-20-19)
post #26 of 33 Old 04-20-19, 16:34 Thread Starter
apiazza
Junior Member
Threadstarter Threadstarter
 
apiazza's Avatar
 
Join Date: Jul 2018
Posts: 67
Thanks: 5
Thanked 2 Times in 2 Posts
Just looking for some clarification here. To get to the detent wheel and shift mechanism. I will need to remove the outer basket. Does it basically just wiggle out? I know it engages with the oil pump on the back side. I guess it just slides off the bearing.

Sent from my SM-G965U using Tapatalk
apiazza is offline  
post #27 of 33 Old 04-20-19, 17:03
MadMel
Senior Member
 
MadMel's Avatar
 
Join Date: Feb 2012
Location: Brisbane
Posts: 1,852
Thanks: 88
Thanked 58 Times in 47 Posts
Sorry, did mine in 2013, and I can't remember what I had for breakfast.
MadMel is offline  
post #28 of 33 Old 04-21-19, 16:54 Thread Starter
apiazza
Junior Member
Threadstarter Threadstarter
 
apiazza's Avatar
 
Join Date: Jul 2018
Posts: 67
Thanks: 5
Thanked 2 Times in 2 Posts
No problem. These questions might be better pointed towards @MacBandit .

In addition to that questions, how do I safely remove the detent wheel from the drum? I pulled the shift mechanism and detent arm out of the donor motor and wanted to pull the wheel as "practice" but I dont want to damage anything in the process of prying it away from the drum. Thanks for all the help, guys! I'm feeling more confident once all the parts show up to complete the job.

Sent from my SM-G965U using Tapatalk
apiazza is offline  
post #29 of 33 Old 04-23-19, 16:56 Thread Starter
apiazza
Junior Member
Threadstarter Threadstarter
 
apiazza's Avatar
 
Join Date: Jul 2018
Posts: 67
Thanks: 5
Thanked 2 Times in 2 Posts
The factory pro shift star instructions say you can pull the star off with pliers but I can't seem to get it to budge. I dont want to pry against the drum bearing. Any ideas?

Sent from my SM-G965U using Tapatalk
apiazza is offline  
post #30 of 33 Old 04-23-19, 17:55
MadMel
Senior Member
 
MadMel's Avatar
 
Join Date: Feb 2012
Location: Brisbane
Posts: 1,852
Thanks: 88
Thanked 58 Times in 47 Posts
I don't know if there's enough space, but could you get a bearing puller in there?
MadMel is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Triumph675.Net Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode


Forum Jump

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome