wear on wire POSSIBLE 2010 MODEL ISSUES - Triumph675.Net Forums
Reply
 
Thread Tools Display Modes
post #1 of 24 Old 08-07-09, 00:33 Thread Starter
revo2010
Member
 
revo2010's Avatar
 
Join Date: May 2009
Location: quebec,canada
Posts: 300
Thanks: 0
Thanked 0 Times in 0 Posts
wear on wire POSSIBLE 2010 MODEL ISSUES

i tought i could share something you should check
while i was still searching for my annoying sqeak when hitting bumps i found something .
look at your stearing damper if it touched the wiring in black tape .
mine was rubbing and did damage to a wire
i took a tie rap and tied it so it is hgher than damper now
hope it helped someone
daytona 2010 se 500km
see ya
revo2010 is offline  
post #2 of 24 Old 08-07-09, 00:57
old blue
Senior Member
 
old blue's Avatar
 
Join Date: Mar 2009
Location: South of most people.
Posts: 5,462
Thanks: 0
Thanked 38 Times in 31 Posts
Quote:
Originally Posted by revo2010 View Post
i tought i could share something you should check
while i was still searching for my annoying sqeak when hitting bumps i found something .
look at your stearing damper if it touched the wiring in black tape .
mine was rubbing and did damage to a wire
i took a tie rap and tied it so it is hgher than damper now
hope it helped someone
daytona 2010 se 500km
see ya
Well done. Something we should all maybe check.

And FWIW, I've taken a few tie raps in my time, too, but where I work now I don't have to wear a tie, so no problem.

O.B
old blue is offline  
post #3 of 24 Old 08-07-09, 01:12
MGFChapin
Senior Member
 
MGFChapin's Avatar
 
Join Date: Aug 2006
Location: Seattle
Posts: 7,789
Thanks: 83
Thanked 342 Times in 312 Posts
Garage
or just take that garbage damper off
MGFChapin is offline  
post #4 of 24 Old 08-07-09, 01:27 Thread Starter
revo2010
Member
Threadstarter Threadstarter
 
revo2010's Avatar
 
Join Date: May 2009
Location: quebec,canada
Posts: 300
Thanks: 0
Thanked 0 Times in 0 Posts
other things to check

you could put an eyes also on radiator hose on the left side .....it rubbed on metal relay holder
t.p.s. wire are pried a lot under a radiator hose
no grease at all on slide bushing on rear caliper
and about sweak think i found it :exhaust clips loose , will see it tomorrow
i have more time to disasemble than to ride it
(medical problems)

so see ya
revo2010 is offline  
post #5 of 24 Old 08-07-09, 02:01
Cloud
Banned
 
Join Date: May 2009
Location: Seattle
Posts: 0
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by MGFChapin View Post
or just take that garbage damper off
We need more people on the hyperpro GB...
>____>
Cloud is offline  
post #6 of 24 Old 08-07-09, 02:31
MGFChapin
Senior Member
 
MGFChapin's Avatar
 
Join Date: Aug 2006
Location: Seattle
Posts: 7,789
Thanks: 83
Thanked 342 Times in 312 Posts
Garage
Quote:
Originally Posted by Cloud View Post
We need more people on the hyperpro GB...
>____>
exactly, easy fix!!!
MGFChapin is offline  
post #7 of 24 Old 08-08-09, 21:46 Thread Starter
revo2010
Member
Threadstarter Threadstarter
 
revo2010's Avatar
 
Join Date: May 2009
Location: quebec,canada
Posts: 300
Thanks: 0
Thanked 0 Times in 0 Posts
cricket found

this will help for sure
i passed the 3 last days on this .
could stop thinking about it and i was going crazy about that squeak sound
finally found it!!!!!!!!
i have remove every part in front of bike but no use to solve problem
i still dont believe it
gaz tank bolt bushing under seat was the trouble maker .
while i was there fixing it with silicone on bushing i found another stupid thing considering they charged me 600$ for p.d.i.
battery bolt was loose because plastic was underneet the connector !!!
here is the pictures so you will understand :
http://www.printroom.com/ViewAlbum.a...lbum_id=227778
on bushing you see a shinny spot . that was where the sound came from




if you change your windshield ,before putting the new one, check the vaccum device (dont know how to call it).that open and close an air flap
i bet 10$ it is not seated well and the clips are loose .check it and give me news
many thanks for reading me
i know i am hard to read but i usually spreak french

bottom line is: i love this bike !!!!!
nothing is perfect and all those are minor issue so if you are about to buy a daytona 675 dont back off because of thread like this .


see ya !

Last edited by revo2010; 08-08-09 at 22:16.
revo2010 is offline  
post #8 of 24 Old 05-02-10, 02:06
Rorz
Senior Member
 
Rorz's Avatar
 
Join Date: Sep 2009
Location: Adelaide, Australia
Posts: 1,255
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by revo2010 View Post
this will help for sure
i passed the 3 last days on this .
could stop thinking about it and i was going crazy about that squeak sound
finally found it!!!!!!!!
i have remove every part in front of bike but no use to solve problem
i still dont believe it
gaz tank bolt bushing under seat was the trouble maker .
So that's where that squeek comes from.... Nice work big dog.
Rorz is offline  
post #9 of 24 Old 05-02-10, 11:43 Thread Starter
revo2010
Member
Threadstarter Threadstarter
 
revo2010's Avatar
 
Join Date: May 2009
Location: quebec,canada
Posts: 300
Thanks: 0
Thanked 0 Times in 0 Posts
hope it help anyway

you are right .
i usually speak french ! so not easy to translate what is on my mind . i do my best
see ya +

Last edited by revo2010; 05-08-10 at 19:44.
revo2010 is offline  
post #10 of 24 Old 01-25-11, 21:40
Karl
Member
 
Karl's Avatar
 
Join Date: Dec 2010
Location: Auckland
Posts: 631
Thanks: 0
Thanked 0 Times in 0 Posts
Your English is a hell of a lot better than my French!
Karl is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Triumph675.Net Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Hybrid Mode Hybrid Mode


Forum Jump

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome