Join Date: Mar 2015
Thanked 14 Times in 14 Posts
Strange Electrical/Gear Position Sensor Issue
Hey everyone, I've been having an ongoing electrical issue with my 2015 Daytona.
It seems to have something to do with the gear position sensor, which I replaced, it worked fine for about a month or so and it's now giving me the same problem it had before, where the bike won't run and it shows on the dash that it's in neutral no matter what gear it's in.
Occasionally it will show the correct gear and run but it will pretty quickly fail again.
This time I actually got a CEL and 2 error codes
P1698 5V sensor supply circuit malfunction
P0705 Gear position sensor circuit malfunction
Has anyone had a similar issue before?
The only issues I can seem to find with gear position sensors is that they sometimes display the incorrect gear but no one seems to have issues with the bike running.
I've done a quick check of the electrics and didn't find anything obvious, no pinched sections on the harness, charging system is outputting the correct voltage, connections are all good and clean.
I have a Bazzaz Z-Fi installed which I've also swapped out the controller for a spare and checked the harness. So my next step will be to run the disconnect the GPS from it and connect it directly to the bike's harness, then remove the Z-Fi completely if the issue persists.