Join Date: Oct 2018
Thanked 5 Times in 5 Posts
Well, it appears it was the terminals. Checked them this morning, and there was a little play in them. Got about a half rotation from each screw and everything seems to be in working order after driving around for a bit.
Sorry for the novice mistake, seems obvious now. Thanks for the help everyone! I was somewhat panicked last night.
Pull the terminals out and give them a good sanding... It is common that when the terminals are bit loose that some corrosion builds up on the connectors and on the terminals, and this will affect the connection itself. After this, put everything back together and tighten firmly.
Life's so much better on a bike!
Street Triple R 2011
ZX9R C2 (1999)
HEL || JayBee Biker Bits || STOMPGRIP || MOTUL