Join Date: Oct 2016
Thanked 0 Times in 0 Posts
Itís a gen2 ó 2009 with a 2012 engine, etc. I suspect I have too short a rod; Iím just trying to figure out a good length. At 8.5Ē and no QS the pedal is too high and was actually hitting the frame of the rearset. I thought it was the bearing.
If you have a 150mm rod I think i have the spec for the size of the QS; if you have the total spec thatíd be great if you donít have to dismantle the thing!