Triumph675.Net Forums - View Single Post - Attack Performance Rearset: Master Thread
View Single Post
post #81 of Old 01-16-20, 14:48
keeena
Junior Member
 
Join Date: Mar 2019
Posts: 45
Thanks: 1
Thanked 3 Times in 3 Posts
All numbers below are for AP rearsets on a 2012 D675R w/ QS and GP shift and setup for where I like the shift lever. YMMV.

The shift rod length I'm using is 190mm. The length between the 2 jam nuts as installed is 170mm. The length of the whole shebang (from the ball-end of the shift rod assembly to the end of the heim joint on the AP rearsets) is 293mm. I'm pretty sure all other adjustable bits are threaded as far as they can go. Looks like I'm shifted 1 notch on the shift spline to maintain the 90*, the rearset side is a bit off of 90*. Everything works great. Hope this helps!









keeena is offline  
 
 
For the best viewing experience please update your browser to Google Chrome