Join Date: Sep 2017
Thanked 0 Times in 0 Posts
I upgraded to Gilles Tooling levers and had the same issue. It looks like the plunger will unscrew from the Barrell, because it has a hex on it. So I put a deep socket on it, and cranked it loose. The threads immediately galled. The Gilles lever has a small dimple in it's barrel, so I slid the plunger under the boot like it's supposed to be, and set the Barrel dimple. The preload spring on the lever always keeps a small amount of pressure on it.
Sent from my Pixel XL using Tapatalk
I need the barrel too. The lever I bought didn't come with a barrel. That's the part that I'm having difficulty removing. I can't find anything that shows how to removed it.
Last edited by Magnum Maximum; 10-27-17 at 02:15.