06 Daytona Part out - Triumph675.Net Forums
Parts Sell, trade or give away your parts here. FS, WTT, FF all welcome.

Reply
 
Thread Tools Display Modes
post #1 of 28 Old 03-30-12, 10:12 Thread Starter
magrahamkp08
Junior Member
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
06 Daytona Part out

I have an '06 Daytona 675 that i am going to part out. Here is a a run down of everything on the bike as best i know. But i know little about thte bike as i bought it for the front end.

Here is the rundown as best i can tell.
When i did purchase the bike i rode it around for a few miles but that was it. The transmission seemed to shift fine, there was a brief flat spot in the pull of the engine at a certain throttle position, which leads me to believe there is nothing wrong but possibly a new TPS swich or matching the new ecu to the engine. The ECU on the bike now is not the original which i guess means it needs to be matched to the engine to clear some light on the dash. (not really sure though)

The bike DOES have a clear title. But the steering stop has broken off the frame and there is a small crack there as well. But no structural damage

THe crankcase cover was dented and damaged when it was dropped. it was patched with jb weld, but it that repair works jsut fine.

the bike received an awful repaint job and the left side fairing was cracked when it was dropped.

The fuel pump works just fine.
That is as best i can think of right now about the bike. If you have any questions i will answer them as best i can.
I will continue to past more photos as i take them. If specific ones are needed i will continue to upload them.
None of the prices include shipping.

Fuel Pump - Sold
Stock Clipons - $30
Rear Wheel - Sold
Front Wheel - Sold
Rear Shock - $100
ECU - $250
Full Exhaust System- $200

Frame with clean title - Sold
Swingarm - $100


Rearset Brake - Sold
Rearset transmission - **Sold
Chain guard - $15
Complete rear brake setup - $30


Fuel Tank -Sold
Gauges (bracket not included) - Sold
Radiator - Sold



Rear Subframe - $100
Passenger Pegs - $40/each
Infills - $20/each
Front Seat - $40
Left Fairing - $100
No cracks in decent shape minus bad paint job. Turn signal hole has been filled with bondo

Right Fairing - $100
No cracks in decent shape minus bad paint job. Turn signal hole has been filled with bondo. Bondo can be be seen on outside. Detailed photos on the photobucket website

Nose Fairing (comes with headlight)-$100
Small bondo repair on left side. Detailed photos on photobucket link

Tailight - $30


Here is a short video of the bike running.
[nomedia="http://www.youtube.com/watch?v=GeV7kQTqamI&feature=g-upl&context=G2e7466aAUAAAAAAAAAA"]2006 Triumph Daytona - YouTube[/nomedia]

http://s1164.photobucket.com/albums/q579/magrahamkp08/ - Here is the link to photos. Which i will continue to update with more as people request specific ones.
But here are a few to show the bike as bought and the mileage


The bike prior to removing the front end

Last edited by magrahamkp08; 11-13-12 at 23:03.
magrahamkp08 is offline  
Sponsored Links
Advertisement
 
post #2 of 28 Old 03-30-12, 10:49
tuscani451
Member
 
Join Date: Aug 2008
Location: Gilbert, AZ
Posts: 434
Thanks: 0
Thanked 0 Times in 0 Posts
Hi, I need a set of stock brake calipers-do you have a set your taking off this bike?
tuscani451 is offline  
post #3 of 28 Old 03-30-12, 17:02 Thread Starter
magrahamkp08
Junior Member
Threadstarter Threadstarter
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
Not front ones


Sent from my Motorcycle iPhone app
magrahamkp08 is offline  
post #4 of 28 Old 03-30-12, 18:14
Skin_Graft
Senior Member
 
Skin_Graft's Avatar
 
Join Date: Sep 2008
Location: Dirty South
Posts: 862
Thanks: 0
Thanked 1 Time in 1 Post
Does that price on the wheels include bearings, rotors, spacers, and sprocket carrier and cuch drive on the rear?

Also, if answers to the above are YES, can you PM me a price shipped to GA (30904). for the set fr/rr?

Thanks in advance.

------------------------

WERA #654
Hazardous Racing Apparel, Augusta Triumph/Ducati, Bridgestone Tires, Amsoil Lubricants, Pitbull, EBC
Skin_Graft is offline  
post #5 of 28 Old 03-30-12, 21:39
stnd
Junior Member
 
stnd's Avatar
 
Join Date: Mar 2010
Location: Toronto
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
PM Sent for LH Rearset.
stnd is offline  
post #6 of 28 Old 03-31-12, 13:27 Thread Starter
magrahamkp08
Junior Member
Threadstarter Threadstarter
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
Pms replied to
magrahamkp08 is offline  
post #7 of 28 Old 04-02-12, 23:32 Thread Starter
magrahamkp08
Junior Member
Threadstarter Threadstarter
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
Subframe Photos - It is straight. Measured it today to make sure



Wheels

magrahamkp08 is offline  
post #8 of 28 Old 04-03-12, 21:07
koth442
Member
 
koth442's Avatar
 
Join Date: Nov 2011
Location: W. Sacramento
Posts: 235
Thanks: 0
Thanked 4 Times in 3 Posts
Stock license plate bracket??
koth442 is offline  
post #9 of 28 Old 04-05-12, 12:53 Thread Starter
magrahamkp08
Junior Member
Threadstarter Threadstarter
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
Photos added. and post updated
magrahamkp08 is offline  
post #10 of 28 Old 04-08-12, 09:43 Thread Starter
magrahamkp08
Junior Member
Threadstarter Threadstarter
 
Join Date: Sep 2011
Location: Petersburg, VA
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
Updated. Frame and lockset sold
magrahamkp08 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Triumph675.Net Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode


Forum Jump

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome