Triumph 675 Forums banner

shim tappet for valve

1K views 2 replies 2 participants last post by  miky92 
#1 · (Edited)
hallo, i bought few new shims for my valve...but damn i recived the wrong product....
i received big shims, not compatible with my daytona 2010...
can you link me the right part link from world of triumph parts?
and, can i give back those wrong shims i bought and recover my money?
thx...

here's a pic...
 
See less See more
1
#2 ·
Is there a Honda dealer local to you? most late model Honda sportbikes use the same diameter shims as the 675. I think most Yamahas and Suzukis use them as well.
They're 7.48mm, some may call them 7.5mm.
As the counter person will likely want a specific model and year, ask to speak with a service tech and tell him the diameter and thicknesses you need. that's what I did.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top