Triumph 675 Forums banner

finally starting to rebuild my bike

1K views 2 replies 3 participants last post by  R675Soldier 
#1 · (Edited)
long story short the bike and I took a 3 gear 10,000 rpm kartwheel/head plant comming out of turn 3 at CMP june 10. Im finally able to turn wrenches so im going to start rebuilding my bike.

This is what got destroyed
all plastics mostly gone
throttle assembly
right side clip on gone
right side rear set gone
kill switch shattered
fairing stay looks like a taco
adjusters on the top of the forks were completely ground off
tank got ripped open in mutliple places and crushed in on top
clutch cover broke open.

im building the bike back as track only. i fired it up for the first time since the wreck the other day and she purred like nothing ever happened.

this is what i got left to buy as of now
throttle assembly
clutch cover
track plastics

heres a before and after pic, and ill post up pics after i get plastics
heres all the pics of the bike, and me from the wreck when it happened
http://www.triumph675.net/forum/showthread.php?t=63551
 

Attachments

See less See more
2
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top