could somebody please PM me with instructions for keyless ignition? It's been here several times, but the threads are dead. I have a 2012 Daytona R track only bike.
OK, it is cool, but it seems to be not easy to get here in Europe. I would rather do it the cut-solder way with an additional on/off switch on the left side.
Yep, forget about the woodcraft loom its just replacing wires with more wires without the key barrel. Not sure if the harnesses are the same as i've done it on my 08 model.
1 - Remove the key barrel
2 - Unplug from main harness
3 - Carefully extract all wires from the plug on the end of the key barrel except for 2 wires (I will PM you the colors)
4 - Cut the two wire back close to the plug leaving enough length to connect the two with a crimp connector or solder and heat shrink
4 - Bridge the two remaining wires
5 - Plug back into main harness
I did it this way so that the mod was 100% reversible without having to hack into the main harness. Also this way removes everything and there is no need for the woodcraft harness.
Yep, forget about the woodcraft loom its just replacing wires with more wires without the key barrel. Not sure if the harnesses are the same as i've done it on my 08 model.
1 - Remove the key barrel
2 - Unplug from main harness
3 - Carefully extract all wires from the plug on the end of the key barrel except for 2 wires (I will PM you the colors)
4 - Cut the two wire back close to the plug leaving enough length to connect the two with a crimp connector or solder and heat shrink
4 - Bridge the two remaining wires
5 - Plug back into main harness
I did it this way so that the mod was 100% reversible without having to hack into the main harness. Also this way removes everything and there is no need for the woodcraft harness.
ya I got a 2010 675 that some puke stole on me he couldn’t get it started when he just distorted the key switch so i’m turning it into a track bike but i’m like you i want to remove all the BS wiring and just solder it would you have any diograms of how you did your 2012 they should pretty much be identical except i don’t have the coded key could you please let me know if you can walk me trough
Yes, if you just bridge the wires, RH switch works as ON/OFF. I used an additional switch on the left side to replace the key function... and threw the key away.
Would this same procedure work for a 14 model year? If so, can you PM me the details. Thanks!
Status
Not open for further replies.
You have insufficient privileges to reply here.
Related Threads
?
?
?
?
?
Triumph 675 Forums
1.2M posts
39.9K members
Since 2005
A forum community dedicated to Triumph 675 owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!