Triumph 675 Forums banner

07 daytona fuel pump relay subharness install

3K views 1 reply 1 participant last post by  andres675daytona 
#1 ·
Ok people.... I finally found out what i need to do. I've already bought a subharness to add the fuel pump relay. Should deliver this week. From looking at it and I realize the brown and white connectors bridge fuel pump but do not know what the smaller white and black connectors on the 3rd pic actually connect to? The same goes for the cable on the 4th pic. It seems like it goes to the battery. Can someone shed some light?



Sent from my SAMSUNG-SM-N920A using Tapatalk
 
See less See more
4
#2 ·
Ok, so I installed this and I'm still not getting rid of the fault code. Is the loop connector supposed to go on the ground or to the battery? Not sure what to do. There's still no ground power getting to the pump. To start the bike I had to run a wire from the battery to the ground wire on the fuel pump connector. Please help!

Sent from my SAMSUNG-SM-N920A using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top