Single can undertail exhaust..

[Tronix]

looks weird 2 me

[Dave73]

Originally Posted by TwoWheeledWonder

Umm huh? then he put daytona rearsets, daytona forks, and daytona brakes on it. Would have been cheaper to just get a daytona and take the fairings off.

I doubt that would have been "cheaper"... I did this over time, few parts here and there to spread the expense. A lot of the parts came off of my trackbike as well.

I think what I did was easier than going naked on a Daytona. Have you tried to source Street Triple triple clamps or headlights? Not easy to come by, nor cheap when you find them

[vintagespeed]

well, it looks badass whatever it is.

[Zen]

Oh well, found a crm low mount :D


Sent from my iPhone using Motorcycle.com Free App

[Nastybutler]

Originally Posted by Zen

Oh well, found a crm low mount :D


Sent from my iPhone using Motorcycle.com Free App

I think you should hold out for the Daytona subframe and tail and get your single undertail.

[Zen]

Originally Posted by Nastybutler

I think you should hold out for the Daytona subframe and tail and get your single undertail.

Nasty you want Nelson's CRM don't you...


Sent from my iPhone using Motorcycle.com Free App

[Dave73]

Originally Posted by Neanderthal

Dave,
Curious about your fork settings. Are they stock? How many lines of preload do you have showing? Approximate weight w/gear?

Stock 06 forks with 5wt racetech fluid. 4 or 5 lines on the preload, approx 185 lb. Forks -1mm in the upper triple. I like to have sag a little high on this bike to keep the tire on the ground as much as possible

[Nastybutler]

Originally Posted by Zen

Nasty you want Nelson's CRM don't you...

Maaaaaaaybe.