I'm at the final stages of my 12K service. Re-shimed and put the cams back in, installed APE manual CCT, new spark plugs, and valve cover back on.
I began this job 2 weeks ago, was not able to complete it in my time off. Picked it back up a couple days ago. It is lots of work.
Today I will reconnect all electronics, and try my hand at TuneECU. Check for DTC's, balance throttle bodies, possible re-map, and TPS/Adaptation reset.
Lastly, oil and filter change. Was planning on installing the, Renthal clipons, but I'm tired of working on the bike for now.
When ALL is complete, I will post a thread on "12K service observations". I will include "tips" that may save future DIY adventurers some headache.