Join Date: Feb 2011
Thanked 0 Times in 0 Posts
Is everything functioning correctly with a 10 amp?
It could be that, if the leds are not rated to the amount of current running through it is possible that they will overload and cause the fuse to blow.
You can check by using a voltmeter to check the amps on the negative wire after it has gone through the leds.
But check all connections too. You may have a loose connection somewhere and they might just touch for a sec. But a 10 amp fuse may not blow because the resistance in the whole part of that wiring harness may be under 10 amps.
Voltmeters are you friend.
Sent from my GT-P7500 using Motorcycle.com App
I still get those 'oh shit' moments.... The day I don't, is the day I stop riding.
Werkes Slip On Pipe + STD Fender Elim + Intergrated Tailight - ZG Double Bubble DS - Dual HID Headlights and Angel Eyes with Coloured Headlight Housing - Red Seat Cowl - LED Strip Indicators - 1050 Throttle Tube - Attack Reasrsets (Red Pegs) - Powdercoated wheels and Sidestand - GB protection Kit - CRG Levers folding - Saddlemen CF Track Seat - Watsens