R/R Regulator Rectifier old & new comparison photo

Ruby Racing · 11-16-12, 13:35

As I've just fitted my new R/R under the recent recall I though I would post a picture of the old R/R next to the new replacement so all can see the difference.

This was for a 2006 Daytona where the R/R is mounted at the back of the motor next to the shock. The new R/R comes with a new mounting bracket and a new sub loom.

The old one is on the left, the new one on the right together with the sub loom and the bracket.

Hope this helps.

MacBandit · 11-16-12, 13:55

Thank you. That confirms that it's the same kit they've been using for the past couple years.

Ruby Racing · 11-16-12, 14:05

My pleasure MacBandit.

bballman01 · 11-16-12, 14:17

So does the bracket move it at all or just accommodate the new shape?

Ruby Racing · 11-16-12, 17:52

It just accommodates the new shape as there isn't really a lot of room for much else. It sits in the same place as the original.

NJ Steve · 11-17-12, 02:38

I bought my 675 used and it is a 2009, does anyone know if there was a recall for my year? Im not in warranty anymore.... I'd like to have mine swapped out as well! Thanks

Ruby Racing · 11-17-12, 11:58

Quote:

Originally Posted by NJ Steve

I bought my 675 used and it is a 2009, does anyone know if there was a recall for my year? Im not in warranty anymore.... I'd like to have mine swapped out as well! Thanks

Look at the sticky started by MacBandit in this section. It details the VIN's covered. Or just call your dealer.

bballman01 · 11-17-12, 13:45

Quote:

Originally Posted by Ruby Racing

It just accommodates the new shape as there isn't really a lot of room for much else. It sits in the same place as the original.

Good to know, Cheers Ruby

toronto675 · 11-23-12, 17:40

Just got my rr from dealer for my 06 track bike .Thank you for mounting info!

Geof3 · 11-23-12, 18:50

The new bracket fits slightly different and makes getting to the bolt on the left side a bit of a pain. That is, if you don't want to remove your shock. Took a little creative finesse to get it all bolted up. The new unit just looks more robust and the connectors are far better! Have you done your fuel pump relay yet? It's on recall too. If not, get that loom and do it while you are in there...

11-16-12, 13:35	#1
Ruby Racing BOTM Winner Join Date: Jan 2009 Location: Jersey, Channel Islands Posts: 1,650	R/R Regulator Rectifier old & new comparison photo As I've just fitted my new R/R under the recent recall I though I would post a picture of the old R/R next to the new replacement so all can see the difference. This was for a 2006 Daytona where the R/R is mounted at the back of the motor next to the shock. The new R/R comes with a new mounting bracket and a new sub loom. The old one is on the left, the new one on the right together with the sub loom and the bracket. Hope this helps. Attached Thumbnails __________________ To read about the transformation click > Project Trixie Transformation
Status: Offline

11-16-12, 13:55	#2
MacBandit Senior Member Join Date: Sep 2008 Location: Seattle Posts: 7,592	Thank you. That confirms that it's the same kit they've been using for the past couple years. __________________ http://www.triumphinstructions.com http://www.triumph.co.uk/uk/Handbooks.aspx http://www.rideatriumph.com/
Status: Offline

11-16-12, 14:05	#3
Ruby Racing BOTM Winner Join Date: Jan 2009 Location: Jersey, Channel Islands Posts: 1,650	My pleasure MacBandit. __________________ To read about the transformation click > Project Trixie Transformation
Status: Offline

11-16-12, 14:17	#4
bballman01 Senior Member Join Date: Apr 2008 Location: Hazzagate N'orkshire UK Posts: 904	So does the bracket move it at all or just accommodate the new shape? __________________ If ur not ridin' ur not livin'
Status: Offline

11-16-12, 17:52	#5
Ruby Racing BOTM Winner Join Date: Jan 2009 Location: Jersey, Channel Islands Posts: 1,650	It just accommodates the new shape as there isn't really a lot of room for much else. It sits in the same place as the original. __________________ To read about the transformation click > Project Trixie Transformation
Status: Offline

11-17-12, 02:38	#6
NJ Steve Junior Member Join Date: Jul 2012 Location: Hudson County Posts: 52	I bought my 675 used and it is a 2009, does anyone know if there was a recall for my year? Im not in warranty anymore.... I'd like to have mine swapped out as well! Thanks Last edited by NJ Steve; 11-17-12 at 02:45.
Status: Offline

11-23-12, 17:40	#9
toronto675 Junior Member Join Date: May 2012 Location: Toronto Posts: 29	Just got my rr from dealer for my 06 track bike .Thank you for mounting info!
Status: Online

11-23-12, 18:50	#10
Geof3 Member Join Date: Jul 2012 Location: Colorado Springs Posts: 353	The new bracket fits slightly different and makes getting to the bolt on the left side a bit of a pain. That is, if you don't want to remove your shock. Took a little creative finesse to get it all bolted up. The new unit just looks more robust and the connectors are far better! Have you done your fuel pump relay yet? It's on recall too. If not, get that loom and do it while you are in there...
Status: Offline

Remove Advertisements Sponsored Links
Triumph675.net Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode