Anyone in DC-MD-VA have Their Regulator Rectifier Replaced?

morsetaper2 · 11-04-12, 13:17

Got my R/R recall letter and have been reading some or the R/R threads that are recall related.

Seems some are getting replaced w/ old OE or upgraded O/E SCR type R/R's that are still failure prone. Supposedly the replacement should be a Mosfet type R/R (connectors plugging into it) vs the old style (failure prone) SCR types (wires come out of R/R).

Anyone been to Fredericktown Yam-Tri to have their R/R replaced under the recall? If yes, post up what you got. A new mosfet type or older SCR type.

Pictures are good if you can.

You might see this thread... R/R RecallThread

New Style: Mosfet - where connectors plug into R/R (pic borrowed from "Neandrathal")

Old Style SCR Type: wires come out of R/R (pics borrowed from "R")

triumphspeedfour · 11-04-12, 14:00

I had mine done at Clinton Cycles about three weeks before the recall was issued. I can take some photos and post them in a bit. Cost around $300. I'm working on a letter to Triumph voicing my displeasure at their timing.

S2R1K_675 · 11-05-12, 08:33

Mine is sitting at Chesapeake Cycles waiting to be replaced. Died a sad, terrible death a couple weeks ago and I only got it to them just before Sandy f'd up everything in the world.

weezy84 · 11-09-12, 13:13

+1 got it done at Chesapeake Cycles a couple months ago. in n out in two hours.

morsetaper2 · 11-12-12, 09:20

Quote:

Originally Posted by weezy84

+1 got it done at Chesapeake Cycles a couple months ago. in n out in two hours.

Weezy,

Was your replacement part of the recall? What kind of R/R did they install? OE SCR type or mosfet. See the pics in my post #1.

Thanks!

weezy84 · 11-16-12, 09:12

Quote:

Originally Posted by morsetaper2

Weezy,

Was your replacement part of the recall? What kind of R/R did they install? OE SCR type or mosfet. See the pics in my post #1.

Thanks!

Hi,

Yes, it was part of the recall. Called them up, gave them my VIN. They scheduled me 2 weeks later. They installed the new MOSFET type.

morsetaper2 · 11-18-12, 17:02

Quote:

Originally Posted by weezy84

Hi,

Yes, it was part of the recall. Called them up, gave them my VIN. They scheduled me 2 weeks later. They installed the new MOSFET type.

Thanks for replying back. I appreciate it.

Mark

nitemask · 11-18-12, 18:10

Had mine replaced under warranty at Fredericktown Yamaha about 2 years ago and they replaced it the SH820AC.

RunTheNumbers · 02-11-13, 14:57

I had mine replaced at Clinton Cycles when they were still a Triumph dealership. I still take both my Speed Triple and Daytona 675 there. Great service. Great mechanics.

theophilus · 03-03-13, 10:45

had mine done in maryland under warranty!

11-04-12, 13:17	#1
morsetaper2 Senior Member Join Date: May 2006 Location: Gaithersburg, MD USA Posts: 1,881	Anyone in DC-MD-VA have Their Regulator Rectifier Replaced? Got my R/R recall letter and have been reading some or the R/R threads that are recall related. Seems some are getting replaced w/ old OE or upgraded O/E SCR type R/R's that are still failure prone. Supposedly the replacement should be a Mosfet type R/R (connectors plugging into it) vs the old style (failure prone) SCR types (wires come out of R/R). Anyone been to Fredericktown Yam-Tri to have their R/R replaced under the recall? If yes, post up what you got. A new mosfet type or older SCR type. Pictures are good if you can. You might see this thread... R/R RecallThread New Style: Mosfet - where connectors plug into R/R (pic borrowed from "Neandrathal") Old Style SCR Type: wires come out of R/R (pics borrowed from "R") __________________ No Comment! Last edited by morsetaper2; 11-12-12 at 09:25. Reason: typos
Status: Offline

11-04-12, 14:00	#2
triumphspeedfour Junior Member Join Date: Dec 2005 Posts: 59	I had mine done at Clinton Cycles about three weeks before the recall was issued. I can take some photos and post them in a bit. Cost around $300. I'm working on a letter to Triumph voicing my displeasure at their timing.
Status: Offline

11-05-12, 08:33	#3
S2R1K_675 Member Join Date: Mar 2011 Location: DC Posts: 291	Mine is sitting at Chesapeake Cycles waiting to be replaced. Died a sad, terrible death a couple weeks ago and I only got it to them just before Sandy f'd up everything in the world. __________________ '09 Daytona 675-GPR Triple Thunder full system, Custom tune by MRP motorsports, Shorai battery, Watsen flush mounts, CA tail light '07 Ducati S2R1K-Leo Vince titanium single pipe, spark midpipe, CRG levers, suburban machinery bars '03 Monster 620 Dark-Sold 03/26/2011
Status: Offline

11-09-12, 13:13	#4
weezy84 Member Join Date: Mar 2011 Location: NoVA Posts: 184	+1 got it done at Chesapeake Cycles a couple months ago. in n out in two hours.
Status: Offline

11-18-12, 18:10	#8
nitemask Member Join Date: Apr 2010 Location: DC Area Posts: 256	Had mine replaced under warranty at Fredericktown Yamaha about 2 years ago and they replaced it the SH820AC.
Status: Offline

02-11-13, 14:57	#9
RunTheNumbers Junior Member Join Date: Feb 2009 Location: Charlottesville, Virginia Posts: 37	I had mine replaced at Clinton Cycles when they were still a Triumph dealership. I still take both my Speed Triple and Daytona 675 there. Great service. Great mechanics.
Status: Offline

03-03-13, 10:45	#10
theophilus Junior Member Join Date: Jun 2012 Location: Northern Virginia Posts: 46	had mine done in maryland under warranty!
Status: Offline

Remove Advertisements Sponsored Links
Triumph675.net Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode