Which plug goes where? - Triumph675.Net Forums
Maintenance and repair Problems, fixes, general maintenance talk

Reply
 
Thread Tools Display Modes
post #1 of 20 Old 11-15-12, 06:29 Thread Starter
rubenastley
Junior Member
 
Join Date: Jul 2012
Location: melbourne
Posts: 84
Thanks: 0
Thanked 0 Times in 0 Posts
Which plug goes where?

Hey guys, first time taking the daytona apart and i left it butchered for a couple months and now putting it back together.. got most of it together but a few plugs and vacuum hoses im not sure where they go? / don't remember lol..



I know two of them go into the fuel tank but not sure about the third?



Two vacuum hoses? where do these go?



Which vacuum hose goes here? is it the long one thats origin is located near the O2 sensor?

I assume most of the plugs are fool-proof... if they fit correctly then its in the correct plug? unless there are identical connectors with different color codes? sorry i'm unfamiliar with the plugs and probably should of taken more note when i took them apart lol.. Also i tried to do a compression test a while back and the bike would only crank over once and then die.. is it because the tank is removed from the ECU? any help is appreciated!

Last edited by rubenastley; 11-15-12 at 06:35.
rubenastley is offline  
Sponsored Links
Advertisement
 
post #2 of 20 Old 11-15-12, 06:38
miky92
Junior Member
 
miky92's Avatar
 
Join Date: Jun 2011
Location: Italy
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to miky92 Send a message via Skype™ to miky92
the two hoses are for the tank... for vents.

and connectors, depends form the year...2 are for tank for sure, the third may be for the sensor of the airbox (if you removed also it, in this case remember to attach also the hose from throttle body to the sensor)
if you leaved only the tank... then there are all for tank i guess :P
miky92 is offline  
post #3 of 20 Old 11-15-12, 08:13
sittingturbo
Member
 
sittingturbo's Avatar
 
Join Date: Aug 2011
Location: San Diego, CA
Posts: 546
Thanks: 0
Thanked 0 Times in 0 Posts
And if the 3rd isn't for the previous 2 spots mentions... It could be for the map sensor...

Also, the 2 for the tank will only go to the intended plug, so no issues there, they are keyed to one another.
sittingturbo is offline  
post #4 of 20 Old 11-15-12, 09:25
DecepticonDon
BOTM Marshall
 
DecepticonDon's Avatar
 
Join Date: Jun 2008
Location: near Savannah, GA
Posts: 3,551
Thanks: 44
Thanked 9 Times in 7 Posts
I believe the connector at the top of the pic is for the ISM(Idler Stepper Motor)
If the four wires are:
orange/pink
orange/blue
orange/white
orange/brown

the tube coming out of the throttle body may be for the intake flapper. need a better picture
DecepticonDon is offline  
post #5 of 20 Old 11-15-12, 09:43
Knolly
BOTM Winner
 
Knolly's Avatar
 
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,848
Thanks: 10
Thanked 40 Times in 33 Posts
The identical (aside from color) connectors go to the tank.

bRown goes to the Right, bLack goes to the Left.

Capitalized for emphasis on how I remember.

2013 Street Triple
2009 Ninja 250 Track/Race Bike
2009 Triumph Daytona 675 - Sold - My Self-Indulgent Bike Thread
2008 Street Triple - Sold
Knolly is online now  
post #6 of 20 Old 11-15-12, 10:57
TwoWheeledWonder
Noob Hazer
 
TwoWheeledWonder's Avatar
 
Join Date: Sep 2010
Location: KC,MO
Posts: 12,010
Thanks: 70
Thanked 234 Times in 177 Posts
Quote:
Originally Posted by Knolly View Post
The identical (aside from color) connectors go to the tank.

bRown goes to the Right, bLack goes to the Left.

Capitalized for emphasis on how I remember.
Actually the brown and black have those little tips on opposite sides. So they wont just go on either connector.

2010 TornadoRed D675 Trackbike
~
TwoWheeledWonder is offline  
post #7 of 20 Old 11-15-12, 11:14
Red October
Member
 
Red October's Avatar
 
Join Date: May 2012
Location: Cedar Park, TX
Posts: 217
Thanks: 0
Thanked 2 Times in 2 Posts
Two connectors on the bottom (orange and black) go to the gastank. The easy way to remember is:
Orange goes right next to the fuel line plastic elbow which also has the orange locking tab on it.

Vent hoses are pre-bent so just their position should tell you approximately which side they are on (they criss-cross under the tank), but ultimately it should n't matter...
Red October is offline  
post #8 of 20 Old 11-15-12, 12:36
Knolly
BOTM Winner
 
Knolly's Avatar
 
Join Date: Oct 2009
Location: Chicago, IL
Posts: 3,848
Thanks: 10
Thanked 40 Times in 33 Posts
Quote:
Originally Posted by TwoWheeledWonder View Post
Actually the brown and black have those little tips on opposite sides. So they wont just go on either connector.
Well shiiiit, learn something new every day.

2013 Street Triple
2009 Ninja 250 Track/Race Bike
2009 Triumph Daytona 675 - Sold - My Self-Indulgent Bike Thread
2008 Street Triple - Sold
Knolly is online now  
post #9 of 20 Old 11-15-12, 12:52
TwoWheeledWonder
Noob Hazer
 
TwoWheeledWonder's Avatar
 
Join Date: Sep 2010
Location: KC,MO
Posts: 12,010
Thanks: 70
Thanked 234 Times in 177 Posts
Hahaha Triumph engineers where thinking when they got to that area ahaha


And it is ok, its my engineering eye that catches those things haha

2010 TornadoRed D675 Trackbike
~
TwoWheeledWonder is offline  
post #10 of 20 Old 11-16-12, 00:17
MacBandit
Senior Member
 
MacBandit's Avatar
 
Join Date: Sep 2008
Location: Seattle
Posts: 10,257
Thanks: 2
Thanked 137 Times in 124 Posts
Garage
No they thought about it after everyone was connecting it wrong. I know on at least some Triumphs they can be reversed. I don't need to explain how I know this do I?
MacBandit is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Triumph675.Net Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode


Forum Jump

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome