A Few Pics From The STR-R Photo Shoot - Page 2

Godly · 11-12-12, 06:57

Looks great!

Ruby Racing · 11-12-12, 07:08

Quote:

Originally Posted by baytriple

Really great job. I live the way scorpion have blatantly ripped of akras logo.

Actually you're wrong, it's the other way round. Akrapovic used to be called Skorpion, but then Scorpion Exhausts made them change it as their name was too similar to theirs.

lola · 11-12-12, 20:01

I think it looks way better than the Parkingo Street triple R's

cwmc29 · 11-13-12, 01:36

I like the colour combo, the tail end looks cool. The whole bike looks killer. Nice work.

wvstr · 11-13-12, 11:00

Bike looks great, any numbers as far as weight and HP are concerned? Good luck with race series.

**Triumph Race Support** · 11-15-12, 02:16

Cheers guys. We still have loads of work to do on her. I had to throw her together quickly for the shoot and up and coming magazine feature. The wheels in the pic are off my Daytona so don't think we have thrown loads at this bike with carbon wheels. Its was put toghether on a small budget and with bits we had laying around.

Spec as follows (from memory):

2012 Street Triple R
Stock engine with cams dialled in on APE adjustable sprockets
Prototype MWR HE Race Filter
TRS Large Air Intake
One Off Exhaust, Zard Daytona Headers & Collector, Custom Made Link Pipe and Scorpion Serket End Can (104db) We are making the same system using stock headers
SAi Blanking Kit
TuneBoy Custom Map (Ongoing Project as Bike Changes)
Pro-Alloy Engine Bolt Kit
GB Racing Engine Cover Kit
520 AFAM Chain & Sprockets Conversion
MWR Fuel Filter
TWM QA Fuel Cap
TRS Quick Action Throttle Mod
SES Rearsets
EvoTech Fold Up Short Levers
TRS Frame Sliders
PFM Quick Release Discs (Not in Pic)
Brembo RC Pads for Hot Days or SC for Cold and Short Races
TRS Nose Cone & Clock Bracket
TRS Belly Pan
TRS Seat Unit with Removable Foam Seat Pad on its Own Base
Ohlins RSU Rear Shock with 100Nm Spring
K-Tech 20mm Kit with 8.5Nm Springs
TRS Carbon/Kevlar Tank Protectors
Tech Spec C3 Tank Grips
TRS Swing Arm Protectors
Stock Bars with TRS Bar Ends
Goodridge Custom Brake Lines (Mk 5!)
Putoline DOT 4 Brake Fluid
Putoline NANA Tech 4+ 10/40 Engine Oil
Ti & Alloy Bolts in Various Places
Rad Fan Removed

Still To Do:
Fit Bigger Daytona Radiator & SES Hoses
Pro-Shift Quick Shifter (Amazing Bit of Kit)
JTS Race Kit Bell Mouths + 1 Stock
Ride the Dam Thing!!!!!!!!

When I get time and my iMac back (been in 2 weeks for a HD recall) I hope to post some close up pics.

Rino07 · 11-16-12, 17:39

Waouw!

slavei · 11-22-12, 07:20

gorgeous bike!!!! im freakin drooling here! any chance on a street version of the race bodywork?

**Triumph Race Support** · 11-26-12, 09:53

The belly pan will fit all street bikes no probs. When used with a stock system theres no mods to be done. If uses with a low system some minor cutting away of the belly pan may be required.
I have used the seat on a road bike, I just made my own tail tidy with lights and indiactors on it. The nose cone is a no light only option!

DarrenKav · 11-26-12, 18:29

love it!!

11-12-12, 06:57	#11
Godly Senior Member Join Date: May 2011 Location: Beckley, WV Posts: 3,352	Looks great! __________________ "Faster we become, until the thrill of speed overcomes the fear of death"
Status: Offline

11-12-12, 20:01	#13
lola Member Join Date: May 2010 Location: los angeles Posts: 253	I think it looks way better than the Parkingo Street triple R's
Status: Online

11-13-12, 01:36	#14
cwmc29 Junior Member Join Date: Dec 2011 Location: Tecumseh, Ontario Posts: 75	I like the colour combo, the tail end looks cool. The whole bike looks killer. Nice work.
Status: Offline

11-13-12, 11:00	#15
wvstr Junior Member Join Date: Apr 2009 Location: Fairmont,WV Posts: 75	Bike looks great, any numbers as far as weight and HP are concerned? Good luck with race series.
Status: Online

11-15-12, 02:16	#16
Triumph Race Support Site Sponsor Join Date: Nov 2007 Location: Alfreton, Derbyshire Posts: 1,322	Cheers guys. We still have loads of work to do on her. I had to throw her together quickly for the shoot and up and coming magazine feature. The wheels in the pic are off my Daytona so don't think we have thrown loads at this bike with carbon wheels. Its was put toghether on a small budget and with bits we had laying around. Spec as follows (from memory): 2012 Street Triple R Stock engine with cams dialled in on APE adjustable sprockets Prototype MWR HE Race Filter TRS Large Air Intake One Off Exhaust, Zard Daytona Headers & Collector, Custom Made Link Pipe and Scorpion Serket End Can (104db) We are making the same system using stock headers SAi Blanking Kit TuneBoy Custom Map (Ongoing Project as Bike Changes) Pro-Alloy Engine Bolt Kit GB Racing Engine Cover Kit 520 AFAM Chain & Sprockets Conversion MWR Fuel Filter TWM QA Fuel Cap TRS Quick Action Throttle Mod SES Rearsets EvoTech Fold Up Short Levers TRS Frame Sliders PFM Quick Release Discs (Not in Pic) Brembo RC Pads for Hot Days or SC for Cold and Short Races TRS Nose Cone & Clock Bracket TRS Belly Pan TRS Seat Unit with Removable Foam Seat Pad on its Own Base Ohlins RSU Rear Shock with 100Nm Spring K-Tech 20mm Kit with 8.5Nm Springs TRS Carbon/Kevlar Tank Protectors Tech Spec C3 Tank Grips TRS Swing Arm Protectors Stock Bars with TRS Bar Ends Goodridge Custom Brake Lines (Mk 5!) Putoline DOT 4 Brake Fluid Putoline NANA Tech 4+ 10/40 Engine Oil Ti & Alloy Bolts in Various Places Rad Fan Removed Still To Do: Fit Bigger Daytona Radiator & SES Hoses Pro-Shift Quick Shifter (Amazing Bit of Kit) JTS Race Kit Bell Mouths + 1 Stock Ride the Dam Thing!!!!!!!! When I get time and my iMac back (been in 2 weeks for a HD recall) I hope to post some close up pics. __________________ www.triumphracesupport.co.uk http://www.ukracesupport.co.uk http://www.facebook.com/pages/Triump...98420213507997
Status: Offline

11-16-12, 17:39	#17
Rino07 Junior Member Join Date: Nov 2011 Location: Jambes Posts: 4	Waouw!
Status: Offline

11-22-12, 07:20	#18
slavei Junior Member Join Date: Oct 2011 Location: garner Posts: 54	gorgeous bike!!!! im freakin drooling here! any chance on a street version of the race bodywork?
Status: Offline

11-26-12, 09:53	#19
Triumph Race Support Site Sponsor Join Date: Nov 2007 Location: Alfreton, Derbyshire Posts: 1,322	The belly pan will fit all street bikes no probs. When used with a stock system theres no mods to be done. If uses with a low system some minor cutting away of the belly pan may be required. I have used the seat on a road bike, I just made my own tail tidy with lights and indiactors on it. The nose cone is a no light only option! __________________ www.triumphracesupport.co.uk http://www.ukracesupport.co.uk http://www.facebook.com/pages/Triump...98420213507997
Status: Offline

11-26-12, 18:29	#20
DarrenKav Junior Member Join Date: Jul 2012 Location: Orchard Park, NY Posts: 22	love it!!
Status: Offline

Remove Advertisements Sponsored Links
Triumph675.net Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode