need f*%king help with headlights - Page 3

wfire19 · 10-17-12, 07:54

im just saying it looked like it was a low/hi kit, mayb it isnt?

but if it was connection low to low would have 2 connections so both projectors are on when the bike is on, then having the high to high would be the same and flipping the high switch looked like it would have sent a signal through your harness to adjust the projectors or something to cause a high beam signal

i know a single set of low beam HIDs are bright enough but it just feels like your using 2/3 of what that kit is capable of with this set up

I'd also check how legal that red light up front is just in case...

allaussiegrown · 10-17-12, 16:13

yeah if this is a high lo kit, there should be a wire not being used that when the high beam is activated it would turn on the electromagnets that pull reflectors back and the back of the globes...

Maybe investigate it and if you want to use it. Wire in another switch.

Sent from my GT-P7500 using Motorcycle.com App

BRKYLN675 · 10-24-12, 22:39

ok finally got the pix so everyone can see. an i did my assembly without putting it in the oven. here are the results.

Click image for larger version

Name: Image 1.jpg
Views: 77
Size: 156.6 KB
ID: 33653

Click image for larger version

Name: IMG_0044.jpg
Views: 77
Size: 107.5 KB
ID: 33654

Click image for larger version

Name: IMG_0031.jpg
Views: 83
Size: 96.0 KB
ID: 33655

Click image for larger version

Name: IMG_0042.jpg
Views: 78
Size: 77.0 KB
ID: 33656

Click image for larger version

Name: IMG_0033.jpg
Views: 78
Size: 64.2 KB
ID: 33663

Click image for larger version

Name: IMG_0036.jpg
Views: 76
Size: 106.3 KB
ID: 33658

Click image for larger version

Name: IMG_0048.jpg
Views: 78
Size: 64.7 KB
ID: 33659

these are the 2 low beams thats 55w

Click image for larger version

Name: IMG_0028.jpg
Views: 77
Size: 49.2 KB
ID: 33660

Click image for larger version

Name: Image 2.jpg
Views: 77
Size: 136.7 KB
ID: 33661

Click image for larger version

Name: Image.jpg
Views: 74
Size: 130.7 KB
ID: 33662

NewShockerGuy · 10-29-12, 13:20

Take a picture of the projector output if you don't mind.

-Nigel

jellies · 10-30-12, 02:07

What kit did you order? I am planning on doing this and don't know what size to get for the 675. It was a relatively difficult project on my 600rr but it was bike specific so I knew it would work.

BRKYLN675 · 11-07-12, 23:36

Quote:

Originally Posted by jellies

What kit did you order? I am planning on doing this and don't know what size to get for the 675. It was a relatively difficult project on my 600rr but it was bike specific so I knew it would work.

i bought one of the ones off of ebay i went off of what they said would work for my bike i emailed them first to make sure.. this came from china it is actually a pain in the ass to install to be honest i will never try this one again i did it while changing the my housing to a different color.

Click image for larger version

Name: IMG_0021.jpg
Views: 61
Size: 84.3 KB
ID: 33925

Click image for larger version

Name: IMG_0022.jpg
Views: 60
Size: 108.6 KB
ID: 33926

Click image for larger version

Name: IMG_0020.jpg
Views: 60
Size: 97.9 KB
ID: 33927

i hope this helps let me know if you have an other question.

L337Chen · 03-19-13, 17:45

sry to revive this thread but i didnt want to make a new one... i have bought the same kit you have with the same stuff the hid,halo,and demon eye but mine has 2 sets of led for "eye brows" i didnt take the bike apart yet but i looked at the kit and it looks a little confusing. whats weird about my kit is that it has a switch, and yours didnt come with one. i wasnt sure what is was for... i will post pics in a little bit. how did you paint the inside without putting it in the oven? and what kind of spray paint did you use?

L337Chen · 03-19-13, 18:16

i want to be able to switch the deamon eye on and off, the leds to be on all the time and halos to be on at all times.

image sharing

CrotchAndRocket · 03-19-13, 20:30

Run Sep wires to a switch and you can

Sent from Motorcycle.com Free App

L337Chen · 03-19-13, 22:23

how would i do that?

10-17-12, 07:54	#21
wfire19 Junior Member Join Date: Oct 2011 Location: Green Bay Posts: 119	im just saying it looked like it was a low/hi kit, mayb it isnt? but if it was connection low to low would have 2 connections so both projectors are on when the bike is on, then having the high to high would be the same and flipping the high switch looked like it would have sent a signal through your harness to adjust the projectors or something to cause a high beam signal i know a single set of low beam HIDs are bright enough but it just feels like your using 2/3 of what that kit is capable of with this set up I'd also check how legal that red light up front is just in case...
Status: Online

10-17-12, 16:13	#22
allaussiegrown Member Join Date: Feb 2011 Location: Sydney Posts: 519	yeah if this is a high lo kit, there should be a wire not being used that when the high beam is activated it would turn on the electromagnets that pull reflectors back and the back of the globes... Maybe investigate it and if you want to use it. Wire in another switch. Sent from my GT-P7500 using Motorcycle.com App __________________ I still get those 'oh shit' moments.... The day I don't, is the day I stop riding. '11 675R Werkes Slip On Pipe + STD Fender Elim + Intergrated Tailight - ZG Double Bubble DS - Dual HID Headlights and Angel Eyes with Coloured Headlight Housing - Red Seat Cowl - LED Strip Indicators - 1050 Throttle Tube - Attack Reasrsets (Red Pegs) - Powdercoated wheels and Sidestand - GB protection Kit - CRG Levers folding - Saddlemen CF Track Seat - Watsens
Status: Offline

10-24-12, 22:39	#23
BRKYLN675 Junior Member Join Date: May 2012 Location: Brkyn- san fran Posts: 43	ok finally got the pix so everyone can see. an i did my assembly without putting it in the oven. here are the results. these are the 2 low beams thats 55w Attached Thumbnails
Status: Offline

10-29-12, 13:20	#24
NewShockerGuy BOTM Winner Join Date: Aug 2008 Location: FairFax, VA Posts: 2,230	Take a picture of the projector output if you don't mind. -Nigel __________________ ~NSG~
Status: Offline

10-30-12, 02:07	#25
jellies Junior Member Join Date: Aug 2012 Location: Long Beach Posts: 36	What kit did you order? I am planning on doing this and don't know what size to get for the 675. It was a relatively difficult project on my 600rr but it was bike specific so I knew it would work.
Status: Offline

03-19-13, 17:45	#27
L337Chen Junior Member Join Date: Aug 2012 Location: Tarzana Posts: 47	sry to revive this thread but i didnt want to make a new one... i have bought the same kit you have with the same stuff the hid,halo,and demon eye but mine has 2 sets of led for "eye brows" i didnt take the bike apart yet but i looked at the kit and it looks a little confusing. whats weird about my kit is that it has a switch, and yours didnt come with one. i wasnt sure what is was for... i will post pics in a little bit. how did you paint the inside without putting it in the oven? and what kind of spray paint did you use?
Status: Online

03-19-13, 18:16	#28
L337Chen Junior Member Join Date: Aug 2012 Location: Tarzana Posts: 47	i want to be able to switch the deamon eye on and off, the leds to be on all the time and halos to be on at all times. image sharing
Status: Online

03-19-13, 20:30	#29
CrotchAndRocket Member Join Date: Jun 2012 Location: Phoenix Posts: 277	*Re: need f%king help with headlights** Run Sep wires to a switch and you can Sent from Motorcycle.com Free App
Status: Online

03-19-13, 22:23	#30
L337Chen Junior Member Join Date: Aug 2012 Location: Tarzana Posts: 47	how would i do that?
Status: Online

Remove Advertisements Sponsored Links
Triumph675.net Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode