Triumph 675 Forums banner

675 Parts Compatibility List

245K views 379 replies 191 participants last post by  scuncknuts 
#1 · (Edited by Moderator)
Anyone have a 675 parts compatibility list they can share? I know things like a GSX-R brake lever and front sprocket fit. Trying to compile a complete list of parts from other Triumph or non-Triumph bikes that fit.

TIA.

**********************
UPDATE 7/18/09. Thanks to all who provided inputs and keep 'em coming including any updates/corrections to the existing list.

**DISCLAIMER: Nothing's perfect, use these suggestions at your own risk.

1. Oil Filter: BMW, 2007 CBR600RR, CBR1000RR
Comments: Direct fit.
K&N part number KN-204 fits almost every bike you can imagine including ours!

2. Fuel Pump: Yamaha R1 (2004+), Triumph Sprint 1050.
Comments: R1 fuel warning indicator is in a different place but it's fine for a track bike. Sprint 1050 pump connections identical to D675, but slightly different internal to the tank - fixing plate needs another notch filing in it to orientate the pump in the tank correctly and fuel sensor does not work.

3. Brake Lever: Suzuki GSX-R (2003+ GSX-R750, 2004+ GSX-R600, 2005+ GSX-R1000, 2008 GSX1300BK B-King)
Comments: Direct fit.

4. Front Sprocket: Suzuki GSX-R 600 (01-07), Suzuki GSX-R 1000 (01-07), Suzuki GSXR 750 (00-07), Yamaha R6 (99-01), Yamaha R5/RD 350, ZX-10
Comments: Direct fit.

5. Throttle Tube: Yamaha R1, Triumph Speed Triple, Triumph Sprint 1050
Comments: Direct fit.

6. Fuel Tank: Triumph Speed Triple
Comments: Direct fit.

7. Front Brake Pads: Yamaha R6 (2006+), Triumph Speed Triple (07-08), ZX-9R F1-2
Comments: Direct fit. ZX-9R F1-2 kawi part number 43082-1290 (has 3 grooves instead of 5).

8. Rear Brake Caliper: Yamaha R1, 03-05 Yamaha R6, 06-up Yamaha R6S
Comments: Direct fit.

9. Mirrors: Ducati, Suzuki GSX-R, Triumph 955
Comments: Some mods needed. See threads below.
http://www.triumph675.net/forum/showthread.php?t=26130&highlight=ducati+mirrors
http://www.triumph675.net/forum/showthread.php?t=18199&highlight=gsxr
http://www.triumph675.net/forum/showthread.php?t=20287&highlight=gsxr
http://www.triumph675.net/forum/showthread.php?t=9045&highlight=mirrors

10. Clutch Perch & Lever: Yamaha R6 (2001)
Comments: Possibly other model years fit as well. Fine on race bike, may or may not be issue for street.

11. Steering Head Bearings: Yamaha R6 (99-01)
Comments: Probably compatible with other bikes as well.

12. Forks: Honda CBR 600RR (08), Kawasaki ZX6RR (03)
Comments: Honda 600RR is direct fit (may have to use RR axle). On Kawi forks, need to swap out the caliper blocks at the bottom of the forks. Caliper block is different to accommodate smaller axle - but fork tubes, caps and internals are the same.

13. Head Stock: Suzuki GSX-R1000 (05-06)
Comments: Direct fit.

14. Headers: Triumph Speed Triple
Comments: Direct fit.

15. Rear Swingarm Bobbins: Yamaha R6
Comments: Direct fit. 6mm bolts.

16. Footpegs: Honda CBR1000RR (04-08), Yamaha R1 (03)
Comments: Direct fit. Other model year Yamaha R1 may fit as well.

17. Front Brake Calipers: Triumph Speed Triple (07-08), Suzuki GSX-R1000, 750, and 600, 06 R6
Comments: Speed triple is direct fit. Suzuki calipers line up fine, but need to drill bolt holes out a little and add spacers to distance radially.
R6: Better Brakes - Finally! - Triumph675.Net Forums

18. Wheels: Yamaha R6 (03-07)
Comments: Mods required.
Trackday wheel options - Triumph675.Net Forums

19. Front Brake Master Cylinder Reservoir Assembly: Yamaha R1
Comments: A near perfect fit. R1 assembly is probably less expensive as well.

20. Clutch Lever: Triumph Speed Triple (04-07), Speed Four (05-06), Daytona 600/650 (04-05), 955i (04-06), Sprint ST/RS (04-07), Thruxton (04-07), Bonneville T100 (06-07), Tiger (07), Rocket III (04-07)
Comments: Direct fit. These are based on comparing Pazzo Lever part numbers, so there may be some variation for OEM or OEM direct replacements.

21. Rear Shock Mounts: Yamaha R6 (99-02)
Comments: Direct fit. Aluminum and about an 1/8 inch lower than OEM 675.

22. Fork Seals: 05 R6
Comments: Direct fit.

23. Wheel Bearings and Seals: Suzuki, Honda
Comments: Suzuki rear wheel bearings (2 Req, SUZ P/N 08133-62047), Suzuki front wheel bearings (2 Req, SUZ P/N 08133-60047), Suzuki rear left outer wheel bearing - sprocket carrier (1 Req, SUZ P/N 09262-25061), Rear left oil seal - sprocket side (1 Req, SUZ P/N 09283-35028), Front wheel oil seals (2 Req, HONDA P/N 90753-074-003), Rear right oil seal - brake side (1 Req, HONDA P/N 91252-KZ4-003).

24. Crankshaft Position Sensor: Aprilia 450 RXV
Comments: Model year has not been determined as of yet.
A Nice Repair for Defective Crank Sensor! - Triumph675.Net Forums
 
See less See more
#233 ·
16. Footpegs: Honda CBR1000RR (04-08), Yamaha R1 (03)
Comments: Direct fit. Other model year Yamaha R1 may fit as well.

Is this mean only the foot pegs or the whole rear set fits? Looking for a full rearset.. Anybody had tried other bike rearset? Thanks.
 
#249 ·
I went through about 10 pages and didn't see it, so I'm not sure if this is posted already:

The turn signal flasher is interchangeable with most honda, kawasaki, and suzuki turn signal flashers. They all use the same plug

Here's what the plug looks like. The factory relay doesn't have pigtails coming out of it, the wiring harness plugs directly in it. You can find LED relays either with pigtails or without. It doesn't matter, as long as it has that rectangular two pin plug.



I found this out accidentally when I went to cycle gear and bought a Kawasaki LED turn signal relay with the pigtails on it, that way, I could cut off the "Kawasaki" connector and solder on my own two-pin plug to make it work. Much to my surprise, it plugs right in to the factory harness! I had to use a zip tie to secure it in the factory location.
 
#250 ·
Being that the oil filter is interchangeable with lots of other types of bikes, vehicles, engines, (my Generac 7500W Briggs & Stratton generator takes the same oil filter), I was wondering if an "oil filter sandwich" originally designed for another bike that has the same oil filter would also be interchangeable to fit the Triumph.

I'm looking to add an oil cooler, and I want to tap into the oil system using an oil filter sandwich, that way, it's fully pressurized, rather than tapping into a fitting near the oil filter and letting it drain unpressurized into the oil pan.

I'm thinking of using something like this:http://www.ebay.com/itm/Honda-Suzuk...Parts_Accessories&vxp=mtr&hash=item53e93472fb

I wonder if this one fits. If it doesn't fit, there's got to be one that does.

It'll be designed for one of the bikes that has an interchangeable oil filter with the daytona 675.

Let me know!
Thanks!
 
Top