Triumph 675 Forums banner

GP Reservoir Kits

9K views 63 replies 23 participants last post by  Hokie 
#1 · (Edited)
Hey everyone!

I'm putting together rear reservoir kits much like the HRC branded kit but for less money
and much easier to obtain. I'd like to open this to my fellow Triumph friends first. These
kits will be replacing the rear brake reservoir with a high chemical resistant tubing. It will
remove the old cup hanging off the side of your bike and give you that GP race look.
With the kit's clear tubing, you will now be able to see the fluid and know immediately
when it's time for a change.

Kits will use quality materials, to including:
- Spring clamp
- SS 7/16in Worm-gear hose clamp
- ss 1/2in Rubber lined clamp *Triumph kit only*
- HRC branded Plug/Breather
- Tygon 2375 5/16 inch clear tubing - Highest chemical resistant tubing

CLICK HERE for info/specs on the Tygon 2375 tubing in .PDF format


It's a universal kit and can be used on many different types of motorcycles. The kits will
come with 12 inches of the Tygon tubing. You will only need about 8 inches for the rear
reservoir. The remaining 4 or so inches can be used to update the hose for your front
master cylinder.


Above is a picture of the kit on my Daytona Track bike. Notice the tubing in the picture
differs from what you will receive. The kit is exactly the same otherwise. My bike was
the first trial run. After much research, I found the Tygon 2375 is a much better tubing
as the brake fluid does not sweat through it. I will be switching out for the Tygon ASAP.

Installation is easy! Written instructions and my contact information will be included to assist with any questions.

I'm going to be selling these kits for $20 USD + Shipping. International
rates will vary. Please contact me for international rates as they will
vary depending on destination.

***PRE-SALE OVER***
FORUM MEMBERS ONLY
: I'm doing a pre-sale for $15 USD, which includes
shipping. Pre-sale will conclude October 12, 2012. Shipping will begin the following week.
***PRE-SALE OVER***

Please PM me with orders and/or any questions you might have.

Thanks a lot and keep the rubber side down!
- Dustin Alan


Pictures from members with the BMAF Racing GP Brake kit:



Photo courtesy of TheKyleRC
 
See less See more
2
#34 ·
#35 ·
**UPDATE**
More kits shipping out Monday. Sorry for the delay on some kits, Had to order more supplies.

Please everyone send me pics!
 
#40 ·
Very nice. I did the same thing by sourcing the items myself... this would have been nice to get when I was doing mine!

The only issue I have with this mod, is filling the tube... How are you guys doing it? Are their funnels with ends that small? Eye dropper (haha)?

Also mine is only like 4 or 5 inches long... :whistle:

Scott
 
#41 ·
Very nice. I did the same thing by sourcing the items myself... this would have been nice to get when I was doing mine!

The only issue I have with this mod, is filling the tube... How are you guys doing it? Are their funnels with ends that small? Eye dropper (haha)?

Also mine is only like 4 or 5 inches long... :whistle:

Scott
Make your own funnel with a piece of paper or thin plastic.

Or - connect the stock reservoir to the end of the hose. Fill the hose. Disconnect. Cap it.

Sent from my iPhone using MO Free
 
#47 ·
No Problem! Sorry for the delayed shipping. Hurricane Sandy work with my shipping scheduled. :laugh:
 
#49 ·
Got mine on today. Looks a lot cleaner. Took about 20 minutes. Thanks!
 

Attachments

#51 ·
Blue fluid looks sick!

Took time to install mine today. Took me a little extra time cause I didn't know air could get trapped in the banjo bolts. But installed it and looks great, very happy with the overall look too. Good quality, easy installation, 5 stars in my book!
Sting
Thanks for posting pics guys!
 
#50 ·
Took time to install mine today. Took me a little extra time cause I didn't know air could get trapped in the banjo bolts. But installed it and looks great, very happy with the overall look too. Good quality, easy installation, 5 stars in my book!
Sting
 

Attachments

#61 ·
Took time to install mine today. Took me a little extra time cause I didn't know air could get trapped in the banjo bolts. But installed it and looks great, very happy with the overall look too. Good quality, easy installation, 5 stars in my book!
Sting
Got mine on today. Looks a lot cleaner. Took about 20 minutes. Thanks!
Can you two email me high res photos?
 
#53 ·
#54 ·
I would buy it simply cuz it's blue.
 
#60 ·
Pm me if you're still selling this! I'm interested
PM sent! Hope you're still selling these!
^^^ PM's sent :thumbup:

Curious, but would this work on a street triple as well? or are the mounting points different
These Triumph kits will work on either

Yes... Still for sale?
Yes Sir!

SHIT did I not pay!
I still interested
I know. Pay up sucka! :smilielol5:
 
#63 ·
C'mon Jeff! Install that thing. :rofl:

That size is fine. I can always resize it.
 
You have insufficient privileges to reply here.
Top