Triumph 675 Forums banner

Sprocket question

2K views 7 replies 7 participants last post by  wavrdr 
#1 ·
Hey, are there any swingarm / chain guide interference issues with running a setup like 14/42 or 14/43? I've searched around and no one is really doing it on this bike but it doesn't seem at first glance that there would be interference issues.

Thanks.
 
#3 ·
14/42 = .33
16/47 = .34 (stock)

The gearing change is insignificant and would be hardly noticeable. Top speed would be a little more then -3mph from stock.

It might be useful however if you are trying to change the chain angle or relative position in relation to the swingarm and thus drive out of corners.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top